3W Power LED / Emitter Series

Features
  Highest Flux
  Very long operating life ( life >> 50000hr )
  More Energy Efficient than Incandescent and most Halogen lamps
  Low voltage DC operated
  Instant light (less than 100 ns)
  Superior ESD protection
Package Dimensions
Notes:
1.  Drawings not to scale.
2.  All dimensions are in millimeters.
3.  Tolerance is ±0.1mm unless otherwise noted.
4. Protruded resin under flange is 1.0mm max.
5. Lead spacing is measured where the leads emerge from the package.
6. Specifications are subject to change without notice.
7. Precautions for ESD:
STATIC SHIELD Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded.
Absolute Maximum Ratings at Ta=25℃
Parameter Symbol Max Unit
Power Dissipation PD 3 W
Pulse Forward Current IPF 1000 mA
Forward Current IF 700 mA
Reverse Voltage VR 5 V
Operating Temperature Range Topr -40 to +85 ℃
Storage Temperature Range Tstg -40 to +85 ℃

Flux Characteristics at 700mA , Junction Temperature, TJ= 25℃

Color Model Min.(Lumen) Typ.(Lumen)
White HP803NW 70 lm 80 lm
Warm White HP803WW 50 lm 60 lm
Blue HP803NB 30 lm 40 lm
Pure Green HP803PG 70 lm 80 lm
Amber HP803NO 40 lm 50 lm
Red HP803NR 60 lm 70 lm

Optical Characteristics at 700mA , Junction Temperature, TJ = 25℃

Color CCT / λD λ λ/T
Min. Typ. Max.
White 5000K 6000K 7000K -- --
Warm White 2850K 3300K 3800K -- --
Blue 460nm 470nm 475nm 25 0.04
Cyan 490nm 505nm 515nm 30 0.04
Pure Green 520nm 530nm 540nm 35 0.04
Amber 587nm 590nm 595nm 20 0.05
Red 620nm 625nm 645nm 20 0.05

Electrical Characteristics at 700mA , Junction Temperature, TJ = 25℃

Color Forward Voltage

/W
Thermal Resistance,

Junction To Case		 V/T
Min. Typ. Max.
White 3.4V 3.6V 4.0V 15 -2.0
Warm White 3.4V 3.6V 4.0V 15 -2.0
Blue 3.4V 3.6V 4.0V 15 -2.0
Pure Green 3.6V 3.8V 4.0V 15 -2.0
Amber 2.8V 3.0V 3.2V 18 -2.0
Red 2.8V 3.0V 3.2V 18 -2.0
NOTES:
1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. maintains a tolerance of ±10% on flux and power measurements
2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. maintains a tolerance of± 1 nm for dominant wavelength measurements.
3. CCT ±5% tester tolerance.
Precautions For Use
▪ Over–current–proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change （Burn out will happen）
Typical Electrical / Optical Characteristics Curves


Reliability Test Items and Conditions
No. Item Test Conditions Test time Ac∕Re
1 Solder Heat 260±5C 5 sec 0∕1
2 Temperature Cycle -40C 25C 105C 25C 100cycle 0∕1
30 min 5 min 30 min 5 min 20 cycle 0∕1
3 Thermal Shock -40C 105C 1000 hrs 0∕1
5 min 5 min 1000 hrs 0∕1
4 High Temperature Storage 85C 1000 hrs 0∕1
5 Low Temperature Storage -35C 1000 hrs 0∕1
6 DC Operating Life IF＝700mA 1000 hrs 0∕1
7 High Temperature∕High Humidity Ta 60C、R.H 90％. 1000 hrs 0∕1
Judgment Criteria Forward Voltage Vf Vfmax Increase <1.2x
Reverse Current IR IR max Increase <2x
Luminous Intensity Flux Iv Decay < 50%
Note : Measurement shall be taken after the tested samples have been returned to normal ambient conditions.
Soldering heat reliability（DIP）：Please refer to the following figure

Copyright (C) 2004 ISP All rights reserved.