|
|
| Superflux RGB LED |
 |
Characters
* Viewing angle 200/200/200
* Reliable and Rugged
* Standard 3mm diameter package
| ITEM |
MATERIALS |
| Resin(Mold) |
Epoxy |
| Lens Color |
Water Transparent |
| Lead Frame |
Ag Plating Copper
Alloy |
| Dice |
Red |
AlGaInP/GaAs |
| Green |
InGaN |
| Blue |
InGaN |
Absolute Maximum Ratings (Ta=250C)
| Item |
Symbol |
Value |
Unit |
| Red |
Green |
Blue |
| Power Dissipation |
PD |
120 |
120 |
120 |
mW |
| DC Forward Current |
IF |
20 |
20 |
20 |
mA |
| Pulsed Forward
Current |
IFP |
100 * |
100 * |
100 * |
mA |
| Reverse
Voltage |
VR |
5
▲ |
5
▲ |
5
▲ |
V |
| Operating
Temperature |
Topr |
-25
~ +80 |
0C |
| Storage
Temperature |
Tstg |
-40
~ +100 |
0C |
| Soldering
Temperature¡â |
Tsol |
260 |
0C |
| * Duty 1/10 Pulse Width 0.1ms
|
▲ This Rating is Zener Diode |
| △ At the position of 4mm
from the bottom of the package within 5 seconds. |
|
Outline Dimensions
Directive Characteristics (Ta=250C)
|
| Electrical-Optical Characteristics (Ta=250C) |
Relative Luminous
Intensity |
| Part
No. |
Luminous Intensity
(mcd)☆ |
Forward Voltage
(V) |
Forward Voltage
(V) |
Reverse
Current (μA) |
Wavelength
Characteristics (nm) |
| Typ. |
Min. |
IF(mA) |
Typ. |
Max. |
IF(mA) |
Min. |
IF(μA) |
Max. |
VR
(V) |
λD
Typ. |
λD
Max |
△λTyp |
IF(mA) |
| PARGBCE-C1 |
Red |
700 |
530 |
20 |
1.8 |
2.4 |
20 |
1.3 |
100 |
50 |
5 |
630 |
635 |
20 |
20 |
| Green |
800 |
610 |
20 |
3.2 |
4.0 |
20 |
2.0 |
100 |
50 |
5 |
528 |
533 |
20 |
20 |
| Blue |
100 |
70 |
20 |
3.2 |
4.0 |
20 |
2.0 |
100 |
50 |
5 |
468 |
473 |
20 |
20 |
| ☆ Axial Direction (luminous Intensity
) |
◆ Products are sorted by wavelength,
which cannot be specified by customer |
Notes;
* All dimensions are in millimeters
(inches).
* Tolerance is ±0.25 (.010)mm unless
otherwise noted.
* Protruded resin under flange is 1.0mm
(.04) max.
* Lead spacing is measured where the
leads emerge from the package.
* Caution in ESD: Static Electricity
and surge damages the LED. Lt is recommend to use a wrist band or
anti -electrostatic glove when handling the LED. All devices, Equipment
and machinery must be properly grounded.
Typical Characteristics
The data typical , and the value is not guaranteed.
|
|
